IS Code Book – Building Construction Practices including Painting, Varnishing and Allied Finishing

SI.NCode book used (Description)IS Code number
234Design of Structural Timber In Building -Code of Practice

IS 833:1994

235Equivalent Metric Units For Scales Dimensions And Quantities In General Construction Work

IS 965:1963

236Code of practice for fixing wall coverings

IS 1414:1989

237Code of Practice for Painting of Ferrous Metals in Buildings, Part 1: Pretreatment

IS 1414-1:1971

238Code of practice for the painting of ferrous metals in buildings, Part 2: Painting

IS 1414-2:1971

239Construction of Stone Masonry - Code of Practice, Part 1: Rubble Stone Masonry

IS 1597-1:1992

240Code of practice for construction of stone masonry, Part 2: Ashlar masonry

IS 1597-2:1992

241Code of practice for design and construction of wood stairs for houses

IS 1634:1992

242Code of practice for design and construction of flues and chimneys for domestic heating appliances

IS 1649:1962

243Hot Applied Sealing Compounds for Joints in Concrete- Specification

IS 1834:1984

244preformed fillers for expansion joints in concrete pavement and structures (non-extruding and resilient type): Part 1 Bitumen impregnated fibre - Specification

IS 1838-1:1983

245preformed fillers for expansion joints in concrete pavement and structure (non-extruding and resilient type) Part 2 CNSL Aldehyde resin and coconut pith - Specification

IS 1838-2:1984

246Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based

IS 1838-3:2011

247Code of Practice for Structural Use of Unreinforced Masonry

IS 1905:1987

248Code of practice for use of fixing devices in walls, ceilings and floors of solid construction

IS 1946:1961

249Code of practice for in-situ construction of walls, in buildings with soil-cement

IS 2110:1980

250Code of practice for flat-roof finish: mud phuska

IS 2115:1980

251Sand for masonry mortars - Specification

IS 2116:1980

252Code of Practice for Construction of Jack-Arch Type of Bult-up Floor or Roof

IS 2118:1980

253Code of practice for construction of brick-cum-concrete composite (madras terrace) floor and roof

IS 2119:1980

254Code of practice for construction of reinforced concrete shell roof

IS 2204:1962

255Code of practice for brickworks

IS 2212:1991

256Code of Practice for Preparation and Use of Masonry Mortars

IS 2250:1981

257Code of practice for finishing of wood and wood-based materials, Part 1: Operations and workmanship

IS 2338-1:1967

258Code of practice for finishing wood and wood-based materials, Part 2: Schedules

IS 2338-2:1967

259Code of practice for nail-jointed timber construction

IS 2366:1983

260Painting of Concrete, Masonry and Plaster Surfaces - Code of Practice, Part 1: Operations and Workmanship

IS 2395-1:1994

261Code of practice for painting concrete, masonry and plaster surfaces, Part 2: Schedules

IS 2395-2:1994

262Code of practice for fixing ceiling covering

IS 2441:1984

263Code of practice for the painting of nonferrous metals in buildings, Part 1: Pretreatment

IS 2524-1:1968

264Code of practice for the painting of non-ferrous metals in buildings, Part 2: Painting

IS 2524-2:1968

265Code of practice for fixing rainwater gutters and downpipes for roof drainage

IS 2527:1984

266Code of practice for roofing with wooden shingles

IS 2700:1987

267Code of practice for design and construction of stone slab over joist floor

IS 2792:1964

268Code of practice for roofing with Mangalore tiles

IS 2858:1984

269Code of practice for painting asbestos cement building products

IS 3140:1965

270Code of Practice for Design and Installation of Joints in Buildings

IS 3414:1968

271Code of Practice for Glazing in Buildings

IS 3548:1988

272structural timber in the building - Specification

IS 3629:1986

273Construction of Non-load Bearing Gypsum Block Partitions - Code of Practice

IS 3630:1992

274Code of practice for construction of timber floors

IS 3670:1989

275Code of practice for external facings and veneers, Part I: Stone facing

IS 4101-1:1967

276Code of Practice for External Facings and Veneers, Part II: Cement Concrete Facing

IS 4101-2:1967

277Code of Practice for External Cladding, Part 3: Wall Tiling and Mosaics

IS 4101-3:1985

278Code of practice for reed walling

IS 4407:1967

279Code of practice for finishing wood and wood-based products with nitrocellulose and cold-catalyzed materials

IS 4597:1968

280preferred cut sizes of structural timber - Specification

IS 4891:1988

281Glossary of terms applicable to roof coverings

IS 4920:1968

282Method of test for nail-jointed timber trusses, Part I: Destructive test

IS 4924-1:1968

283Method of Test for Nail-jointed Timber Trusses, Part II: Proof Test

IS 4924-2:1968

284Code of Practice for Design and Construction of Nailed Laminated Timber Beams

IS 4983:1968

285Code of Practice for Laying and Fixing of Sloped Roof Covering, Part I: Slating

IS 5119-1:1968

286Code of practice for laying hardwood parquet and wood block floors

IS 5389:1969

287Code of practice for construction of timber ceilings

IS 5390:1984

288Methods of test for clear finishes for wooden furniture, Part 1: Resistance to dry heat

IS 5807-1:1975

289Methods of test for clear finishes for wooden furniture, Part 2: Resistance to wet heat

IS 5807-2:1975

290Methods of test for clear finishes for wooden furniture, Part 3: Resistance to marking by oils and fats

IS 5807-3:1971

291Methods of test for clear finishes for wooden furniture, Part 4: Resistance to marking by liquids

IS 5807-4:1975

292Methods of test for clear finishes for wooden furniture, Part 5: Test for low-angle glare

IS 5807-5:1975

293Methods of Test for Clear Finishes for Wooden Furniture, Part VI: Resistance to Mechanical Damage

IS 5807-6:1978

294Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part 1: With Hollow Concrete Filler Blocks

IS 6061-1:1971

295Code of practice for construction of floor and roof with joists and filler blocks, Part 2: With hollow clay filler blocks

IS 6061-2:1981

296Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part 3: With Precast Hollow Clay Block Joists and Hollow Clay Filler Blocks

IS 6061-3:1981

297Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part IV: With Precast Hollow Clay Block Slab Panels

IS 6061-4:1981

298Code of practice for anti-termite measures in buildings, Part 1: Constructional measures

IS 6313-1:1981

299Code of Practice for Anti-Termite Measures in Buildings, Part 2: Pre-constructional Chemical Treatment Measures

IS 6313-2:2001

300Code of Practice for Anti-termite Measures in Buildings, Part 3: Treatment for Existing Buildings

IS 6313-3:2001

301Code of practice for construction of floors and roofs using precast doubly-curved shell units

IS 6332:1984

302Code of practice for installation of joints in concrete pavements

IS 6509:1985

303Code of practice for design, fabrication and maintenance of nail-jointed timber posts from small dimensional timber for overhead electric distribution lines for low voltage

IS 7683:1975

304Code of practice for laying mosaic parquet flooring

IS 9472:1980

305Pictorial Surface Preparation Standards for Painting of Steel Surfaces

IS 9954:1981

306Corrugated coir wood wool cement roofing sheets-Specification

IS 10388:1982

307Code of practice for patent glazing

IS 10439:1983

308Code of practice for construction of RB and RBC floors and roofs

IS 10440:1983

309Methods of test for preformed fillers for expansion joints in concrete paving and structural construction

IS 10566:1983

310Joints in Buildings - Vocabulary

IS 10957:1999

311A general checklist of functions of joints in building (ISO 3447-1975)

IS 10958:1984

312Glossary of terms for sealants for building purposes (ISO 6927-1981)

IS 10959:1984

313Code of practice for design and construction of bolt-jointed timber construction

IS 11096:1984

314Code of practice for setting out of buildings

IS 11134:1984

315Specification for one part gun-grade polysulphide-based joints sealants, Part 1: General requirements

IS 11433-1:1985

316Specification for one part gun-grade polysulphide-based joint sealants, Part 2: Methods of test

IS 11433-2:1986

317Classification of joints in buildings for the accommodation of dimensional deviations during construction (ISO 7727-1984)

IS 11817:1986

318Method of test for laboratory determination of air permeability of joints in buildings

IS 11818:1986

319Code of practice for laying and fixing sloped roof coverings using plain and corrugated galvanized steel sheets

IS 12093:1987

320Two-part polysulphide-based sealants - Specification, Part 1: General requirements

IS 12118-1:1987

321Two parts polysulphide based sealants - Specification, Part 2: Methods of test

IS 12118-2:1987

322Code of Practice for Improved Thatching of Roof with Rot and Fire Retardant Treatment

IS 12506:1988

323Code of practice for no-fines cast in situ cement concrete

IS 12727:1989

324Guide for preparation and use of mud mortar in masonry

IS 13077:1991

325Guidelines for painting structures in an aggressive chemical environment

IS 14428:1997

326Guidelines for Maintenance Management of Buildings, Part 1: General

IS 15183-1:2002

327Guidelines for Maintenance Management of Buildings, Part 2: Finance

IS 15183-2:2002

328Guidelines for Maintenance Management of Buildings, Part 3: Labour

IS 15183-3:2002

329Installation of Frameless Door and Window Shutters - Code of Practice

IS 15345:2003

330Handbook on Masonry Design and Construction

SP 20:1991

331Summaries of Indian Standards for Building Materials

SP 21:2005

332Handbook on Causes and Prevention of Cracks in Building

SP 25:1984

333Handbook on Building Construction Practices (Excluding Electrical Work)

SP 62:1997

334Standard colours for building and decorative finishes (with supplement)

SP 1650:1973

335Standard colours for building and decorative finishes- supplement ONLY

SP 1650:1973

Scroll to Top