SI.N | Code book used (Description) | IS Code number |
|---|---|---|
| 1542 | Code of Practice For Design And Construction Of Shallow Foundations In Soils (Other Than Raft, Ring And Shell) | |
| 1543 | Classification and identification of soils for general engineering purposes | |
| 1544 | Method of load test on soils | |
| 1545 | Code of practice for subsurface investigation for foundations | |
| 1546 | Code of practice for design and construction of foundations in soils: General requirements | |
| 1547 | Method for standard penetration test for soils | |
| 1548 | Code of practice for thin-walled tube sampling of soils | |
| 1549 | Methods of test for soils, Part 1: Preparation of dry soil samples for various tests | |
| 1550 | Methods of test for soils, Part 2: Determination of water content | |
| 1551 | Methods of test for soils, Part 3: Determination of specific gravity, Section 1: Fine-grained soils | |
| 1552 | Methods of test for soils, Part 3: Determination of specific gravity, Section 2: Fine, medium and coarse-grained soils | |
| 1553 | Methods of test for soils, Part 4: Grain size analysis | |
| 1554 | Methods of test for soils, Part 5: Determination of liquid and plastic limit | |
| 1555 | Methods of test for soils, Part 6: Determination of shrinkage factors | |
| 1556 | Methods of test for soils, Part 7: Determination of water content-dry density relation using light compaction | |
| 1557 | Methods of test for soils, Part 8: Determination of water content-dry density relation using heavy compaction | |
| 1558 | Methods of test for soils, Part 9: Determination of dry density- moisture content relation by constant mass of soil method | |
| 1559 | Methods of test for soils, Part 10: Determination of unconfined compressive strength | |
| 1560 | Methods of test for soils, Part 11: Determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore water pressure | |
| 1561 | Methods of test for soils, Part 12: Determination of shear strength parameters of soil from consolidated undrained triaxial compression test with measurement of pore water pressure | |
| 1562 | Methods of test for soils, Part 13: Direct shear test | |
| 1563 | Methods of test for soils, Part 14: Determination of density index (relative density) of cohesionless soils | |
| 1564 | Methods of Test for Soils, Part XV: Determination of Consolidation Properties | |
| 1565 | Methods of test for soils, Part 16: Laboratory determination of CBR | |
| 1566 | Methods of test for soils, Part 17: Laboratory determination of permeability | |
| 1567 | Methods of test for soils, Part 18: Determination of field moisture equivalent | |
| 1568 | Methods of test for soils, Part 19: Determination of centrifuge moisture equivalent | |
| 1569 | Methods of test for soils, Part 20: Determination of linear shrinkage | |
| 1570 | Methods of Test for Soils, Part XXI: Determination of Total Soluble Solids | |
| 1571 | Methods of test for soils, Part 22: Determination of organic matter | |
| 1572 | Methods of test for soils, Part 23: Determination of calcium carbonate | |
| 1573 | Methods of Test for Soils, Part XXIV: Determination of Cation Exchange Capacity | |
| 1574 | Methods of test for soils, Part 25: Determination of silica sesquioxide ratio | |
| 1575 | Method of test for soils, Part 26: Determination of pH value | |
| 1576 | Methods of test for soils, Part 27: Determination of total soluble sulphates | |
| 1577 | Methods of test for soils, Part 28: Determination of dry density of soils, in-place, by the sand replacement method | |
| 1578 | Methods of Test for Soils, Part 29: Determination of Dry Density of Soils In-place by the Core-cutter Method | |
| 1579 | Methods of test for soils, Part 30: Laboratory vane shear test | |
| 1580 | Methods of test for soils, Part 31: Field determination of California Bearing Ratio | |
| 1581 | Methods of test for soils, Part 33: Determination of the density in place by the ring and water replacement method | |
| 1582 | Methods of test for soils, Part 34: Determination of density of soil in place by the rubber-balloon method | |
| 1583 | Methods of test for soils, Part 35: Measurement of negative pore water pressure | |
| 1584 | Methods of test for soils, Part 36: Laboratory determination of permeability of granular soils (Constant head) | |
| 1585 | Methods of test for soils, Part 37: Determination of sand equivalent values of soils and fine aggregates | |
| 1586 | Methods of test for soils, Part 38: Compaction control test (Hilf method) | |
| 1587 | Methods of test for soils, Part 39: Direct shear test for soils containing gravel, Section 1: Laboratory test | |
| 1588 | Methods of test for soils, Part 39: Direct shear test for soils containing gravel, Section 2: In-situ shear test | |
| 1589 | Methods of test for soils, Part 40: Determination of free swell index of soils | |
| 1590 | Methods of test for soils, Part 41: Measurement of swelling pressure of soils | |
| 1591 | Glossary of terms and symbols relating to soil engineering | |
| 1592 | Glossary of terms relating to soil dynamics | |
| 1593 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE, Part 1: CONCRETE PILES, Section 1: Driven Cast In-situ Concrete Piles | |
| 1594 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE, Part 1: CONCRETE PILES, Section 2: Bored Cast In-situ Concrete Piles | |
| 1595 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE, Part 1: CONCRETE PILES, Section 3: Driven Precast Concrete Piles | |
| 1596 | Code of practice for design and construction of pile foundations, Part 1: Concrete piles, Section 4: Bored precast concrete piles | |
| 1597 | Code of practice for design and construction of pile foundations, Part 2: Timber piles | |
| 1598 | Code of practice for design and construction of pile foundations, Part 3: Under-reamed piles | |
| 1599 | Code of practice for design and construction of pile foundations, Part 4: Load test on piles | |
| 1600 | Code of practice for design and construction of raft foundations, Part 1: Design | |
| 1601 | Code of practice for design and construction of machine foundations, Part 1: Foundation for reciprocating type machines | |
| 1602 | Code of practice for design and construction of machine foundations, Part 2: Foundations for impact type machines (hammer foundations) | |
| 1603 | Code of practice for design and construction of machine foun dations, Part 3: Foundations for rotary type machines (Medium and high frequency) | |
| 1604 | Code of practice for design and construction of machine foundations, Part 4: Foundations for rotary type machines of low frequency | |
| 1605 | Code of practice for design and construction of machine foundations, Part 5: Foundations for impact machines and other than hammer (forging and stamping press, pig breaker, drop crusher and jolter) | |
| 1606 | Code of practice for design and construction of foundations for transmission line towers and poles | |
| 1607 | Methods of test for stabilized soils, Part 1: Method of sampling and preparation of stabilized soils for testing | |
| 1608 | Methods of test for stabilized soils, Part 2: Determination of moisture content of stabilized soil mixtures | |
| 1609 | Methods of test for stabilized soils, Part 3: Test for determination of moisture content-dry density relation for stabilized soil mixtures | |
| 1610 | Methods of test for stabilized soils, Part 4: Wetting and drying, and freezing and thawing tests for compacted soil-cement mixtures | |
| 1611 | Methods of test for stabilized soils, Part 5: Determination of unconfined compressive strength of stabilized soils | |
| 1612 | Methods of test for stabilized soils, Part 6: Flexural strength of soil-cement using a simple beam with third-point loading | |
| 1613 | Methods of test for stabilized soils, Part 7: Determination of cement content of cement stabilized soils | |
| 1614 | Methods of test for stabilized soils, Part 8: Determination of lime content of lime stabilized soils | |
| 1615 | Methods of test for stabilized soils, Part 9: Determination of the bituminous stabilizer content of bitumen and tar-stabilized soils | |
| 1616 | Methods of test for stabilized soils, Part 10: Test for soil-bituminous mixtures | |
| 1617 | Code of practice for in-situ vane shear test for soils | |
| 1618 | Method for subsurface sounding for soils, Part 1: Dynamic method using 50 mm cone without bentonite slurry | |
| 1619 | Method for subsurface sounding for soils, Part 2: Dynamic method using cone and bentonite slurry | |
| 1620 | Method for subsurface sounding for soils, Part 3: Static cone penetration test | |
| 1621 | Determination of dynamic properties of soil - Method of test | |
| 1622 | Code of practice for determination of bearing capacity of shallow foundations | |
| 1623 | Code of practice for calculation of settlements of foundations, Part 1: Shallow foundations subjected to symmetrical static vertical loads | |
| 1624 | Code of practice for calculation of settlement of foundations, Part 2: Deep foundations subjected to symmetrical static vertical loading | |
| 1625 | Guide for an undisturbed sampling of sands | |
| 1626 | compaction rammer for soil testing | |
| 1627 | Method of determination of modulus of subgrade reaction (K-value) of soils in the field | |
| 1628 | liquid limit apparatus for soils | |
| 1629 | Code of practice for design and construction of conical and hyperbolic paraboloidal types of shell foundations | |
| 1630 | Code of practice for design and construction of diaphragm walls | |
| 1631 | split spoon sampler | |
| 1632 | CBR moulds and their accessories | |
| 1633 | Guide for lateral dynamic load test on piles | |
| 1634 | Guidelines for dewatering during construction | |
| 1635 | Code of practice for site investigations for the foundation in gravel-boulder deposit | |
| 1636 | compaction mould assembly for light and heavy compaction tests for soils | |
| 1637 | equipment for determination of shrinkage factors | |
| 1638 | Code of practice for a sampling of soils by thin wall sampler with stationary piston | |
| 1639 | Guidelines for the design and construction of prestressed rock anchors | |
| 1640 | Code of practice for field control of moisture and compaction of soils for embankment and subgrade | |
| 1641 | earth augers (Spiral type) | |
| 1642 | equipment for subsurface sounding of soils | |
| 1643 | moulds and accessories for determination of density index (relative density) of cohesionless soils | |
| 1644 | Code of practice for design and construction of ring foundation | |
| 1645 | equipment for determination of liquid limit of soils cone penetration method | |
| 1646 | mould assembly for determination of permeability of soils | |
| 1647 | shear box for testing soils | |
| 1648 | Code of practice for design and construction of radar antenna, microwave and TV tower foundations | |
| 1649 | Code of practice for field instrumentation of swelling pressure in expansive souls code of practice for field instrumentation of swelling pressure in expansive soils | |
| 1650 | shear box (large) for testing soils | |
| 1651 | mild steel thin-walled sampling tubes and sampler heads | |
| 1652 | Code of practice for installation and operation of the single-point hydraulic over-flow setting gauge | |
| 1653 | Code of practice for field monitoring of movement of structures using tape extensometer | |
| 1654 | rapid moisture meter for rapid determination of water content in the soil | |
| 1655 | Method for measurement of earth pressure by a hydraulic pressure cell | |
| 1656 | consolidometer for determination of consolidation properties | |
| 1657 | Mould for determination of linear shrinkage - | |
| 1658 | Selection of ground improvement techniques for foundation in weak soils -Guidelines | |
| 1659 | Vibration isolation for machine foundations - Guidelines | |
| 1660 | Apparatus for determination of dry density of soil by core cutter method- | |
| 1661 | Non-destructive integrity testing of piles (NDT) - Guidelines | |
| 1662 | Design and construction for ground improvement - Guidelines, Part 1: Stone columns | |
| 1663 | Design and construction for ground improvement - Guidelines, Part 2: Preconsolidation using vertical drains | |
| 1664 | Compendium of Indian Standards on Soil Engineering: Part-1 LaboratoryTesting of Soils for Civil Engineering Purposes | |
| 1665 | Compendium of Indian Standards on Soil Engineering: Part-2 Field Testing of Soils For Civil Engineering Purposes |