SI.N | Code book used (Description) | IS Code number |
|---|---|---|
| 1763 | high-density polyethene pipes for potable water supplies | |
| 1764 | Unplasticized PVC Pipes for Potable Water Supplies | |
| 1765 | Code of practice for plastic pipes work for potable water supplies, Part 1: Choice of materials and general recommendations | |
| 1766 | Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies Code of Practice, Part 2: Laying and jointing of polyethene (PE) pipes | |
| 1767 | Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies Code of Practice: Part 3 - Laying and Jointing of UPVC Pipes | |
| 1768 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 1: General requirements | |
| 1769 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 2: Specific requirements for 45 degrees elbows | |
| 1770 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 3: Specific requirements for 90-degree elbows | |
| 1771 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 4: Specific requirements for 90-degree tees | |
| 1772 | Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies, Part 5: Specific Requirements for 45-degree Tees | |
| 1773 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 6: Specific requirements for sockets | |
| 1774 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 7: Specific requirements for unions | |
| 1775 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 8: Specific requirements for caps | |
| 1776 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 1: General Requirements for Fittings | |
| 1777 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 2: Specific Requirements for 90° Bends | |
| 1778 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 3: Specific Requirements for 90° TEES | |
| 1779 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 4: Specific Requirements for Reducers | |
| 1780 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 5: Specific Requirements for Ferrule Reducers | |
| 1781 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 6: Specific Requirements for Pipe Ends | |
| 1782 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 7: Specific Requirements for Sandwich Flanges | |
| 1783 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 8: Specific Requirements for Reducing Tees | |
| 1784 | Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 9: Specific Requirements for Ends Caps | |
| 1785 | fabricated high-density polyethene (HDPE) fittings for potable water supplies, Part 1: General requirements | |
| 1786 | fabricated high-density polyethene (MDPE) fittings for potable water supplies, Part 2 Specific requirements for 90-degree tees | |
| 1787 | fabricated high-density polyethene (HDPE) fittings for potable water supplies, Part 3 Specific requirements for 90-degree bends | |
| 1788 | Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage | |
| 1789 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 1: General Requirements | |
| 1790 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 2: Specific Requirements for Sockets | |
| 1791 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 3: Specific Requirements for Straight Reducers | |
| 1792 | Fabricated PVC- U Fittings for Potable Water Supplies - Specification, Part 4: Specific Requirements for Caps | |
| 1793 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 5: Specific Requirements for Equal Tees | |
| 1794 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 6: Specific Requirements for Flanged Tail Pieces with Metallic Flanges | |
| 1795 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 7: Specific Requirements for Threaded Adaptors | |
| 1796 | Fabricated PVC-U fittings for Potable Water Supplies, Part 8: Specific Requirements for 90-degree Bends | |
| 1797 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 9: Specific Requirements for 60 o Bends | |
| 1798 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 10: Specific Requirements for 45o Bends | |
| 1799 | Fabricated PVC-U fittings for Potable Water Supplies, Part 11: Specific Requirements for 30-degree Bends | |
| 1800 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 12: Specific Requirements for 22 ½o Bends | |
| 1801 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends, Part 12: SPECIFIC REQUIREMENTS FOR 22 ½o BENDS | |
| 1802 | Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets | |
| 1803 | Thermoplastics Pipes and Fittings - Methods of Test | |
| 1804 | glass-fibre reinforced plastic (GRP) pipes joints and fittings for use in potable water supply | |
| 1805 | unplasticized polyvinyl chloride (PVC-U)screen and casing pipes for bore/tubewell | |
| 1806 | UPVC pipes for soil and waste discharge systems inside buildings including ventilation and rainwater system | |
| 1807 | Unplasticized Polyvinyl Chloride (PVC-U) pipes for soil and waste discharge systems inside buildings including ventilation and rainwater system | |
| 1808 | UPVC pipe fittings to be used with the UPVC pipes in the suction and delivery lines of agricultural pumps | |
| 1809 | Code of practice for installation of glass fibre-reinforced plastic (GRP) piping system | |
| 1810 | High-density polyethene pipe for sewerage | |
| 1811 | GRP pipes joints and fittings for use in sewerage, industrial waste and water (other than potable) | |
| 1812 | Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge Systems for Inside and Outside Buildings Including Ventilation and Rain Water Systems | |
| 1813 | Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable Installation | |
| 1814 | Polyethene Pipes for the Supply of Gaseous Fuels | |
| 1815 | Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps - Specification | |
| 1816 | Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems | |
| 1817 | Polyethene/ Aluminium/ Polyethylene Composite Pressure Pipes for Hot and Cold Water Supplies | |
| 1818 | Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies | |
| 1819 | Polypropylene-random copolymer pipes for hot and cold water supplies | |
| 1820 | Polyethene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification, Part 1: Fittings for Socket Fusion using Heated Tools | |
| 1821 | Polyethene Fittings for use with Polyethylene Pipes for the supply of Gaseous Fuels - Specification, Part 2: Spigot Fittings for Butt Fusion for Socket Fusion using Heated Tools and for use with Electro Fusion Fittings | |
| 1822 | Polyethene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels, Part 3: Electro Fusion Fittings | |
| 1823 | Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification, Part 1: Pipes and Fittings with Smooth External Surface, Type A | |
| 1824 | Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification, Part 2: Pipes and Fittings with Non-Smooth External Surface, Type B | |
| 1825 | Handbook on Pipes and Fittings for Drinking Water Supply |