SI.N | Code book used (Description) | IS Code number |
|---|---|---|
| 1712 | Code of practice for uniaxial jacking test for deformation modulus of rock | |
| 1713 | Code of practice for the in-situ shear test on rock | |
| 1714 | Method of determination of point load strength index of rocks | |
| 1715 | Method for the determination of unconfined compressive strength of rock materials | |
| 1716 | Method for the preparation of rock specimens for laboratory testing | |
| 1717 | Method for the determination of modulus of elasticity and Poisson's ratio of rock materials in uniaxial compression | |
| 1718 | Method for determination of slake durability index of rocks | |
| 1719 | Method of test for the determination of tensile strength by indirect tests on rock specimens | |
| 1720 | Method for laboratory determination of dynamic modulus of rock core specimens | |
| 1721 | Method of conducting a pull-out test on anchor bars and rock bolts | |
| 1722 | Method for the quantitative description of discontinuities in rock masses, Part 1: Orientation | |
| 1723 | Method for the quantitative description of discontinuities in the rock mass, Part 2: Spacing | |
| 1724 | Method for the quantitative description of discontinuities in the rock mass, Part 3: Persistence | |
| 1725 | Method for the quantitative description of discontinuities in the rock mass, Part 4: Roughness | |
| 1726 | Method for the quantitative description of discontinuities in rock masses, Part 5: Wall strength | |
| 1727 | Method for the quantitative description of discontinuities in rock masses, Part 6: Aperture | |
| 1728 | Method for the quantitative description of discontinuities in the rock mass, Part 7: Filling | |
| 1729 | Method for the quantitative description of discontinuities in the rock mass, Part 8: Seepage | |
| 1730 | Method for the quantitative description of discontinuities in the rock mass, Part 9: Number of sets | |
| 1731 | Method for the quantitative description of discontinuities in rock masses, Part 10: Block size | |
| 1732 | Method for the quantitative description of discontinuities in rock masses, Part 11: Core recovery and rock quality | |
| 1733 | Method for the quantitative description of discontinuities in the rock mass, Part 12: Drillcore study | |
| 1734 | Glossary of terms and symbols relating to rock mechanics | |
| 1735 | Code of Practice for Design and Construction of Shallow Foundations on Rocks | |
| 1736 | rock joints-direct shear strength-laboratory method of determination | |
| 1737 | Method of determination for direct shear strength of rock joints | |
| 1738 | Code of practice for in-situ determination of rock mass deformability using a flexible dilatometer, Part 1: volume change | |
| 1739 | Code of practice for in-situ determination of rock mass deformability using flexible dilatometer, Part 2: Radial displacement | |
| 1740 | Method of test for laboratory determination of water content, porosity, density and related properties of rock material | |
| 1741 | Method for determination of the strength of rock materials in triaxial compression | |
| 1742 | Code of practice for the structural safety of buildings on shallow foundations on rocks | |
| 1743 | The quantitative classification system of rock mass - Guidelines, Part 1: RMR for predicting engineering properties | |
| 1744 | Quantitative classification systems of rock mass-Guidelines, Part 2: Rock mass quality for prediction of support pressure in underground openings | |
| 1745 | The quantitative classification system of rock mass-Guidelines, Part 3: Determination of slope mass rating | |
| 1746 | Code of practice for seismic testing of rock mass, Part 1: Within a borehole | |
| 1747 | Code of practice for seismic testing of rock mass, Part 2: Between the borehole | |
| 1748 | monitoring of rock movement using multi-point borehole extensometers-Guidelines | |
| 1749 | Determination of rock stress- Code of practice, Part 1: Using hydraulic fracturing technique | |
| 1750 | Determination of rock stress-Code of practice, Part 2: Using USBM-type drill hole deformation gauge | |
| 1751 | Determination of rock stress- Code of practice, Part 3: Using a CSIR or CSIRO type cell with 9 or 12 strain gauges | |
| 1752 | Determination of rock stress-Code of practice, Part 4: Using flat jack technique | |
| 1753 | Guidelines for selection and development of the site for building in hill areas, Part 1: Microzonation of urban centres | |
| 1754 | Guidelines for selection and development of the site for building in hill areas, Part 2: Selection and development | |
| 1755 | Guidelines for monitoring of rock movements using probe inclinometer | |
| 1756 | Argillaceous Swelling Rocks - Methods for Laboratory Testing | |
| 1757 | Method of test for laboratory determination of resistivity on rock specimen | |
| 1758 | Code of practice for reinforcement of rock slopes with plane wedge failure | |
| 1759 | Design and construction of bored cast-in-situ piles founded on rocks - Guidelines | |
| 1760 | Method for Blast Vibration Monitoring - Guidelines | |
| 1761 | Tunnelling Methods in Rock Masses -- Guidelines | |
| 1762 | Guidelines for Use in Prediction of Subsidence and Associated Parameters in Coal Mines Having Nearly Horizontal Single Seam Workings |